Stone Rose Packing

Version 3.0

Install

Images	Description	Notes
	1. For each rose head, remove the bottom set of 5 petals and wrap each in paper then foam.
	2. Place the wrapped petals inside the thin usps box on top of a layer of bubble wrap and fill any empty space with more bubble.
	3. Put the closed usps box inside a 10" box on top of a thin layer of packing peanuts
	4. Bag the rose head with the top set of petals still attached to the bracket.
	5. Place rose head carefully in the 10" box (with the usps box) surrounded by packing peanuts.
	6. Place 10" box inside crate with other boxed rose heads. Pad each box on all sides with foam.
	7. The leaf gets wrapped and placed inside small 3x4x4" box along with light bulbs and hardware. Once inside the crate, secure with wood block and screw.
	8. Wearing gloves, bag the brass stem, leaving the plate exposed to screw into the crate. Screw down using two rubber washers per screw until secure.
	9. Place bags of Expands around brass stem. Rest them against the branches but be careful to nor create pressure by forcing bags in place.
	10. Use the rest of the bags of expands to full the crate on top of the sconce. Place lid on crate and screw in place. The painted corners line up.