Difference between revisions of "Transition Mirror Install Instructions"
Jump to navigation
Jump to search
Line 10: | Line 10: | ||
| 1. Lay mirror gently face down on a flat, padded surface. Hold cleat to bottom of the crossbar and measure the distance from the bottom of the mirror to the bottom of the cleat. This will give you a reference measurement for placing it on the wall.|| | | 1. Lay mirror gently face down on a flat, padded surface. Hold cleat to bottom of the crossbar and measure the distance from the bottom of the mirror to the bottom of the cleat. This will give you a reference measurement for placing it on the wall.|| | ||
|- | |- | ||
!scope=row | [[File: | !scope=row | [[File:Wallmeasurements.jpg|200px]] | ||
| 2. Measure from the ground (or surface) where you would like the bottom of the mirror to start and add the measurement from step 1. | | 2. Measure from the ground (or surface) where you would like the bottom of the mirror to start and add the measurement from step 1. | ||
The mirror can move slightly on the cleat from side to side so an approximate placement of the lateral center is fine. | The mirror can move slightly on the cleat from side to side so an approximate placement of the lateral center is fine. |
Revision as of 14:50, 5 September 2023
(***)The included anchors and screws can be used to affix this mirror to the wall. However, due to the variability of wall types, the ultimate responsibility lies with the installer to determine the correct anchors and screws to use.