From Archive | Chen Chen & Kai Williams
Jump to navigation
Jump to search
Version 3.0
Install
Images
|
Description
|
Notes
|
|
1. For each rose head, remove the bottom set of 5 petals and wrap each in paper then foam. |
|
|
2. Place the wrapped petals inside the thin usps box on top of a layer of bubble wrap and fill any empty space with more bubble. |
|
|
3. Put the closed usps box inside a 10" box on top of a thin layer of packing peanuts |
|
|
4. Bag the rose head with the top set of petals still attached to the bracket. |
|
|
5. Place rose head carefully in the 10" box (with the usps box) surrounded by packing peanuts. |
|
|
6. Place 10" box inside crate with other rose heads. Padding each box around all sides with foam. |
|
|
7. The leaf gets wrapped and placed inside small 3x4x4" box along with light bulbs and hardware. Once inside the crate, secure with wood block and screw. |
|
|
8. Wearing gloves, bag the brass stem, leaving the plate exposed to screw into the crate. Screw down using two rubber washers per screw until secure. |
|
|
9. Place bags of Expands around brass stem. Rest them against the branches but be careful to nor create pressure by forcing bags in place. |
|
|
10. Use the rest of the bags of expands to full the crate on top of the sconce. Place lid on crate and screw in place. The painted corners line up. |
|