From Archive | Chen Chen & Kai Williams
Jump to navigation
Jump to search
Instructions
Images
|
Description
|
Notes
|
|
1. Cut piece of plastic large enough to wrap mirror with, line crate |
|
|
2. Cover face of mirror with protective film.
|
Carefully pop large air bubbles with blade and trim excess around edge |
|
|
3. Place mirror face down into crate and wrap plastic sheet around it, securing with tape. Insert folded cardboard pieces between glass and homasote on each side for a snug fit.
|
Line up one of the metal cross bars to be parallel with the side of the crate. |
|
|
4. Screw in wooden crossbars on top of metal bracket. Cross bars need to cover as many of the aluminum "pucks" as possible.
|
The first wooden crossbar lays on top of the parallel metal bar covering 2 "pucks". The second crossbar either covers the last puck or splits the difference if there is more than one puck remaining. |
|
|
5. Screw down the wall cleat to the bottom corner of the crate. Tape bag of hardware to crate above the cleat. |
|
|
6. Place lid on top of crate. Screw in place
|
Line up spray painted corners |
|