Stone Rose Care

Stone Rose Metal Care
Older stainless steel versions do not need special maintenance and can be cleaned with stainless steel cleaner.

Oiled Brass
Brass stone roses have a live finish and are intended to slowly age through use. The metalwork of the Stone Roses are made from brass and silver solder and is finished with a light, air drying oil coating. Brass and silver will naturally change over time.
If refinishing is desired you will need Boeshield T-9 spray and maroon 3M Scotch-Brite pads.

Use appropriate workplace safety gear such as rubber gloves.
1. Tear or cut off a small corner of Scotch-Brite.
2. Spray a small amount of Boeshield on to the Scotch-Brite pad.
3. Follow directions on Boeshield.
4. Using roughly circular motions, apply Boshield to metalwork until desired finish is reached.
5. Wipe excess oil and grime off.