Stone Rose Care

Stone Rose Metal Care

Waxed Brass
The metalwork of the stone rose sconces are made from brass and silver solder and is finished with a light wax finish. The metalwork of the sconces will naturally change over time.
If refinishing is desired you will need Boeshield T-9 spray and maroon 3M scotch-brite pads.

Use approbate workplace safety gear such as rubber gloves.
Tear or cut off a small corner of Scotch-Brite.
Spray a small amount of Boshield on to the scotchbrite pad.
Follow directions on Boshield.
Using roughly circular motions apply Boshield to stone rose metalwork until desired fish is reached.