Stone Rose Install
Version 3.0
Included:
Stone Rose Stem
2 Rose head assemblies
1 Leaf petal
3 Candelabra base 15W T22 E12 bulbs
Felt washers
3 M4 brass acorn nuts
7 Black thumb screws
2 8-32 brass flat head screws with temporary washers
Sconces must be attached to flush wall mounted J-boxes. 120V. Dimmer compatible.
Description | Notes | ||||||
---|---|---|---|---|---|---|---|
1. TURN OFF POWER TO INSTALL LOCATION | |||||||
2. Use WAGO connectors to connect sconce wires to wall wires. | Polarity does not matter. | ||||||
3. Use 8-32 brass flat head screws to attach sconce to J-box. | Black washers are intended to be removed. | ||||||
5. Power can be restored and sconce tested. | |||||||
6. Unpack rose heads carefully and remove the 3 black thumb screws. | Rose heads are extremely fragile. | ||||||
7. Attach the 5 bottom row petals on each rose head with brass acorn nuts. | |||||||
8. Slide the rose over the bulb and socket. | Secure rose head to stem with 3 black thumb screws. | ||||||
}
The brass and silver stem is uncoated and will patina over time. If desired patina can be removed with T-9 Boshield and maroon Scotchbrite pads. Rose petals are made of quartz, a hard, nonabsorbent stone that can be cared for like glass. Each slice is unique and cannot be replaced.
|