Difference between revisions of "Stone Rose Install"
Line 12: | Line 12: | ||
Sconces must be attached to flush wall mounted J-boxes. 120V. Dimmer compatible. | Sconces must be attached to flush wall mounted J-boxes. 120V. Dimmer compatible. | ||
{| class="wikitable" | {| class="wikitable" | ||
Line 46: | Line 44: | ||
|- | |- | ||
| 12. Attach leaf petal using felt washers and brass acorn nuts.|| | | 12. Attach leaf petal using felt washers and brass acorn nuts.|| | ||
} | } | ||
<br> | <br> | ||
The brass and silver stem is uncoated and will patina over time. If desired patina can be removed with T-9 Boshield and maroon Scotchbrite pads. Rose petals are made of quartz, a hard, nonabsorbent stone that can be cared for like glass. Each slice is unique and cannot be replaced. | The brass and silver stem is uncoated and will patina over time. If desired patina can be removed with T-9 Boshield and maroon Scotchbrite pads. Rose petals are made of quartz, a hard, nonabsorbent stone that can be cared for like glass. Each slice is unique and cannot be replaced. |
Revision as of 13:04, 8 August 2023
Version 3.0
Included:
Stone Rose Stem
2 Rose head assemblies
1 Leaf petal
3 Candelabra base 15W T22 E12 bulbs
Felt washers
3 M4 brass acorn nuts
7 Black thumb screws
2 8-32 brass flat head screws with temporary washers
Sconces must be attached to flush wall mounted J-boxes. 120V. Dimmer compatible.
Description | Notes | |
---|---|---|
1. TURN OFF POWER TO INSTALL LOCATION | ||
2. Use WAGO connectors to connect sconce wires to wall wires. | Polarity does not matter. | |
3. Use 8-32 brass flat head screws to attach sconce to J-box. | Black washers are intended to be removed. | |
4. Install light bulbs in sockets. | ||
5. Power can be restored and sconce tested. | ||
6. Unpack rose heads carefully and remove the 3 black thumb screws. | Rose heads are extremely fragile. | |
7. Attach the 5 bottom row petals on each rose head with brass acorn nuts. | ||
8. Slide the rose over the bulb and socket and secure to stem with 3 black thumb screws. | ||
9. Repeat with second rose head. | ||
10. Remove leaf petal from packaging. | ||
11. Attach leaf petal using felt washers and brass acorn nuts. | ||
12. Attach leaf petal using felt washers and brass acorn nuts. |
}
|