Stone Rose Care

V 1.0 Stainless Steel (Out of Production)
Stainless steel versions do not need special maintenance and can be cleaned with stainless steel cleaner.

V 1.1 Brass Plated over Stainless Steel (Out of Production)
Brass plated (surface is continuous brass, no silver transitional fillets) can be cleaned with Brasso or other brass cleaners.

V 2.0 Oiled Brass with Silver Solder (Current)
Brass stone roses have a live finish and are intended to slowly age through use. The metalwork of the Stone Roses are made from brass and silver solder and is finished with a light, air drying oil coating. Brass and silver will naturally change over time.
If refinishing is desired you will need Boeshield T-9 spray and maroon 3M Scotch-Brite pads.

• Use appropriate workplace safety gear such as rubber gloves.*
  

Install

Images	Description	Notes
	1. Cut off a small corner of Scotch-Brite.
	2. Spray a small amount of Boeshield on to the Scotch-Brite pad.
	3. Using roughly circular motions, apply Boshield to metalwork until desired finish is reached.
	4. Wipe excess oil and grime off.