Difference between revisions of "Stone Rose Care"
| Line 10: | Line 10: | ||
'''V 2.0 Oiled Brass with Silver Solder (Current)''' <br> | '''V 2.0 Oiled Brass with Silver Solder (Current)''' <br> | ||
The brass members are joined with silver solder which is also used to fillet and blend the joints. The surface is protected with an air drying oil coating called Boeshield. Brass and silver will naturally patina over time.<br> | The brass members are joined with silver solder which is also used to fillet and blend the joints. The surface is protected with an air drying oil coating called Boeshield. Brass and silver will naturally patina over time.<br> | ||
If refinishing is desired | If refinishing is desired use [https://www.amazon.com/BOESHIELD-Corrosion-Protection-Waterproof-Lubrication/dp/B001447PEK/ref=sr_1_1?crid=1O6287RFM9E8D&keywords=boeshield&psr=PDAY&qid=1689169719&s=prime-day&sprefix=boeshield%2Cprime-day%2C104&sr=1-1-catcorr Boeshield T-9] spray and maroon [https://www.amazon.com/Scotch-Brite-General-Purpose-6-Inch-9-Inch/dp/B000LPN3WQ/ref=sr_1_8?keywords=maroon+scotch+brite+pads&qid=1689169753&sprefix=maroon+scotc%2Caps%2C111&sr=8-8 3M Scotch-Brite] pads.<br> | ||
Use appropriate workplace safety gear such as rubber gloves.<br> | Use appropriate workplace safety gear such as rubber gloves.<br> | ||
Revision as of 19:04, 7 September 2023
V 1.0 Stainless Steel (Out of Production)
Stainless steel versions do not need special maintenance and can be cleaned with stainless steel cleaner.
V 1.1 Brass Plated over Stainless Steel (Out of Production)
Brass plated (surface is continuous brass, no silver transitional fillets) can be cleaned with Brasso or other brass cleaners.
V 2.0 Oiled Brass with Silver Solder (Current)
The brass members are joined with silver solder which is also used to fillet and blend the joints. The surface is protected with an air drying oil coating called Boeshield. Brass and silver will naturally patina over time.
If refinishing is desired use Boeshield T-9 spray and maroon 3M Scotch-Brite pads.
Use appropriate workplace safety gear such as rubber gloves.
| Images | Description | Notes |
|---|---|---|
|
1. Cut off a small corner of Scotch-Brite. | |
|
2. Spray a small amount of Boeshield on to the Scotch-Brite pad. | |
|
3. Using roughly circular motions, apply Boshield to metalwork until desired finish is reached. | |
|
4. Wipe excess oil and grime off. |