Difference between revisions of "Stone Rose Care"
Jump to navigation
Jump to search
| Line 1: | Line 1: | ||
'''Stainless Steel''' | '''V 1.0 Stainless Steel''' | ||
<br> | <br> | ||
Older stainless steel versions do not need special maintenance and can be cleaned with stainless steel cleaner.<br> | Older stainless steel versions do not need special maintenance and can be cleaned with stainless steel cleaner.<br> | ||
'''Oiled Brass''' <br> | '''V 2.0 Oiled Brass with Silver Solder''' <br> | ||
Brass stone roses have a live finish and are intended to slowly age through use. | Brass stone roses have a live finish and are intended to slowly age through use. | ||
The metalwork of the Stone Roses are made from brass and silver solder and is finished with a light, air drying oil coating. Brass and silver will naturally change over time. <br> | The metalwork of the Stone Roses are made from brass and silver solder and is finished with a light, air drying oil coating. Brass and silver will naturally change over time. <br> | ||
| Line 10: | Line 10: | ||
*Use appropriate workplace safety gear such as rubber gloves.* <br> | *Use appropriate workplace safety gear such as rubber gloves.* <br> | ||
<youtube width="240" height="400">SO-arsji9Xo</youtube> | <youtube width="240" height="400">SO-arsji9Xo</youtube> | ||
Revision as of 18:56, 7 September 2023
V 1.0 Stainless Steel
Older stainless steel versions do not need special maintenance and can be cleaned with stainless steel cleaner.
V 2.0 Oiled Brass with Silver Solder
Brass stone roses have a live finish and are intended to slowly age through use.
The metalwork of the Stone Roses are made from brass and silver solder and is finished with a light, air drying oil coating. Brass and silver will naturally change over time.
If refinishing is desired you will need Boeshield T-9 spray and maroon 3M Scotch-Brite pads.
- Use appropriate workplace safety gear such as rubber gloves.*
| Images | Description | Notes |
|---|---|---|
|
1. Cut off a small corner of Scotch-Brite. | |
|
2. Spray a small amount of Boeshield on to the Scotch-Brite pad. | |
|
3. Using roughly circular motions, apply Boshield to metalwork until desired finish is reached. | |
|
4. Wipe excess oil and grime off. |